Or call (619) 587-2814
Before-and-after results from real restoration projects. Drag the sliders to see the difference.
Plastic containment barrier installed to isolate the work area during kitchen remediation.
Industrial air mover positioned to direct airflow along the wall for targeted drying.
Mounto dehumidifier placed on wood flooring to extract moisture from the kitchen space.
Clear plastic partition sealing off the kitchen workspace from the dining area.
Air mover with hose connected to the sink area for comprehensive moisture extraction.
TOPDON thermal camera used to detect hidden moisture behind cabinetry and walls.
Thermal heat mapping reveals cool spots indicating residual moisture in the kitchen.
Detailed thermal scan showing temperature readings to pinpoint affected areas.
Digital moisture meter pressed against the wall to measure moisture content levels.
Moisture meter reading at the cabinet base where it meets the floor, checking for water intrusion.
Close-up of water-damaged cabinet frame with peeling paint and black mold staining on the wall beneath.
Kitchen wall opened to expose plumbing, insulation, and mold-stained drywall during remediation.
Detailed view of opened wall cavity showing plumbing, pink insulation, and dark mold staining on framing.
Wide-angle view of water-damaged wall sectioned off with blue painter's tape, showing exposed framing and mold growth.
Containment area with red HEPA air scrubber and ventilation duct installed under an exposed, mold-damaged ceiling.
Technician in protective Tyvek suit kneeling before a wall section with drywall removed to expose studs and insulation.
Worker in full hazmat suit collecting debris from an opened ceiling cavity during mold remediation.
Wide-angle view of a contained room with air scrubber and ductwork installed beneath an exposed ceiling.
Floor-to-ceiling plastic containment enclosure with zippered entry, sealed with red and blue painter's tape.
Blue Mounto dehumidifier and air scrubber with ventilation duct positioned in a room with an exposed ceiling.
Fully contained room with plastic sheeting on walls and floor, zippered entry, and stepladder staged for ceiling work.
Ceiling and walls masked with protective paper and tape, with copper plumbing exposed for repair.
Room with plastic-covered floor and window, ladder staged for upper wall work.
Wall section wrapped in protective plastic sheeting secured with red and blue tape during remediation.
Fully covered wall with red-taped seams, protecting adjacent living areas from dust and debris.
Kitchen with cabinet base removed, exposing wall studs and electrical wiring behind plastic sheeting.
Thermal imaging camera detecting moisture and cold spots behind walls during inspection.
On-site video walkthrough of the containment and remediation setup.
Gloved hand using a putty knife to remove water-damaged drywall from a protected wall section.
Removed drywall segment showing heavy black mold growth and staining on the paper backing.
Two blue Mounto air movers positioned on plastic sheeting beside an exposed wall cavity.
Five industrial air movers distributed across a contained room to accelerate structural drying.
Air movers and HEPA-filtered unit running inside a taped containment zone with exposed wall studs.
Numbered Mounto air movers staged across plastic-covered flooring within the sealed work zone.
Single blue air mover with power cord running across a taped plastic floor in an exposed-framing room.
Two Mounto air movers plugged into a wall outlet, drying an area with removed drywall and exposed studs.
Air mover running inside a plastic-sealed room with removed drywall exposing wall studs near the floor.
Video showing the drying equipment setup and containment area in progress.
Contact Fast Flood Fix Restoration today. The sooner mitigation begins, the better the outlook for your property.
